Designed and Sized Specifically for Sewer Applications
White Bionax® sewer pressure pipe is designed for sewer applications and sized to Cast Iron Outside Diameter (CIOD) Pipe.
White Bionax® sewer pressure pipe is the same Bionax® pipe used in water applications with a different colour and print line to easily differentiate between applications.
The pipe is made in 6.1m (20ft.) lay lengths and is intended for sewer force main applications or for when pressure-rated pipe and joints are required for sewer installation.
product details
High Impact Strength and Performance
- IPEX PVCO sewer pressure pipe offers all the same performance benefits of Bionax® water pipe including corrosion resistance, fatigue strength and longevity
- The white colour and ‘Sewer Pressure/ Non-Potable’ print line help to easily distinguish White Bionax® from a water pipe
- White Bionax® offers higher impact strength, increase cyclic strength and lower surge pressure for the same flow conditions when compared to PVC pipe. It’s also lighter weight making it easier for handling
- White Bionax® is compatible with Blue Brute® PVC fittings, IPEX Fabricated PVC Fittings and ductile iron fittings
specifications
Certified to The Highest Standards
White Bionax® Sewer Pressure Pipe is designed for sewer applications and sized to Cast Iron Outside Diameter (CIOD) Pipe. Bionax® sewer pressure pipe is fully compatible with existing PVC pipe inventories and available in sizes 150mm through 450mm with a pressure rating of 235 psi for all sizes or 165 psi for sizes 400mm and 450mm only.
resources
Learn more about White Bionax® PVCO Sewer Pressure Pipe
Our resources section covers everything you need to know about White Bionax®. Take a look at our most popular resources below
Product Details
GENERAL
This specification provides the requirements for Molecularly Oriented Polyvinyl Chloride (PVCO) pipe for sewer pressure-pipe applications.
MATERIALS
PVCO pipe shall be manufactured from rigid Polyvinyl Chloride (PVC) compound meeting the requirements of ASTM D1784 cell class 12454.
Gaskets shall meet ASTM F477 for high-head applications.
HYDROSTATIC DESIGN BASIS
Starting-stock PVC pipe shall have a Hydrostatic Design Basis (HDB) of 4,000 psi.
Finished PVCO pipe shall have an HDB of 7,100 psi.
PIPE
Pipe shall be molecularly oriented.
Pipe shall be produced with cast-iron-pipe outside diameters (CIOD) in all sizes.
Pipe shall be joined by integral-bell gasketed joints conforming to ASTM D3139.
Pipe spigot ends shall be chamfered by the manufacturer.
Pipe shall be colour-coded white.
CERTIFICATIONS
PVCO pipe shall conform to AWWA C909 and is certified by CSA and BNQ to CSA B137.3.1.
STANDARDS
PVCO pipe shall conform to the following standards:
ANSI/NSF Standard 14: Plastic Piping System Components and Related Materials
ASTM D1784: Rigid Polyvinyl Chloride (PVC) Compounds
ASTM D3139: Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM F1483: Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe
ASTM F477: Elastomeric Seals (Gaskets) for Joining Plastic Pipe
AWWA C909: Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 inch and Larger
CSA B137.3.1: Molecularly Oriented Polyvinyl Chloride (PVCO) Pipe for Pressure Applications
Specifications
Molecularly Oriented PVC (PVCO)
235psi (1620 kPa): 6”- 18” (150mm – 450mm)
165psi (1135 kPa): 16” – 18” (400mm – 450mm)
ANSI/NSF Standard 14
ASTM D1784
ASTM D3139
ASTM F1483
ASTM F477
AWWA C909
Certified by CSA and BNQ to CSA B137.3.1
Sewer Pressure Applications