Solvent Welding Cements Primers

Notes:

NSF and IAPMO listed to ASTM D2564 standard. NSF listed for potable water and sewer pipe. CSA listed for pressure and nonpressure applications. Medium-bodied, fast setting PVC cement for all classes and schedules through 150 mm (6”) diameter with interference fit Sch. 80 through 100 mm (4”) only.

---

Notes:

NSF listed to ASTM D2564 for potable water and sewer pipe. IAPMO listed to ASTM D2564 standard. CSA certified for PVC pressure and non-pressure applications. Heavy-bodied, medium setting, PVC cement for all classes and schedules through 300 mm (12”) diameter, including Schedule 80. It has good gap filling properties and its medium set allows more working time in warm weather.

---

Notes:

NSF listed to ASTM D2564 for potable water and sewer pipe. IAPMO listed to ASTM D2564 standard. CSA certified for PVC pressure and non-pressure applications. Extra heavy-bodied, slow setting, PVC cement for all classes and schedules through 750 mm (30”) diameter, including Sch. 80 and System 15 in sizes 350 mm - 600 mm (14” - 24”). It is a good fabrication cement, as it has excellent gap filling properties, and because of its slow set, it is ideal for hot weather cement on large diameter pipe.

---

Notes:

NSF listed to ASTM F493 standard for potable water and sewer pipe. Heavy-bodied, medium setting, CPVC cement for all classes and schedules through 300 mm (12”) diameter. Formulated for improved chemical resistance to caustics including hypochlorite solutions. May be used on PVC industrial piping systems for chemical applications. Approved for Xirtec CPVC Industrial Systems.

Notes:

NSF listed to ASTM F656 standard for potable water and sewer pipe. Xirtec 7 is the most aggressive PVC and CPVC primer commercially available. Excellent product for cold weather applications. If used properly, Xirtec 7 will soften pipe and fitting surfaces which is necessary for the proper solvent welding of the materials.

Notes:

NSF listed to ASTM D2564 for potable water and sewer pipe. IAPMO listed to ASTM D2564 standard. CSA certified for PVC pressure and non-pressure applications. Heavy-bodied, medium setting, PVC cement for all classes and schedules through 300 mm (12”) diameter, including Schedule 80. Its strong, aggressive penetration properties provide a strong bond. Its medium set allows more working time in warm weather.

Notes:

Medium-bodied, fast setting ABS cement for all sizes and products in the Duraplus Industrial line. The Grey Duraplus ABS solvent cement is manufactured from ABS particles identical to the material used for the manufacturing of Duraplus Industrial components. The cement is designed to withstand continuous applied pressures up to 230 psi @ 23°C (73°F). Duraplus MEK primer must be used prior to cementing.

---

Notes:

Medium-bodied, fast setting ABS cement for all sizes and products in the Duraplus Air-Line. Duraplus ABS solvent cement, is manufactured from ABS particles identical to the material used for the manufacturing of Duraplus Air-Line components. The cement is designed to withstand continuous applied pressures up to 185 psi @ 23°C (73°F). Duraplus MEK primer must be used prior to cementing.

Notes:

Duraplus MEK Cleaner/Primer must be used prior to solvent welding of any Duraplus and IPEX industrial ABS piping systems.

Notes:

Meets ASTM D2564. NSF and IAPMO listed for potable water and sewer pipe. Medium-bodied, fast setting, PVC cement For rigid pipe sizes with interference fit through 160 mm (6”) diameter. Sch 80 through 110 mm (4”) diameter. For irrigation or drain. No primer needed for drainage applications unless required by local code.

---

Notes:

Meets the requirements of ASTM D2564 for use with PVC pipe and fittings. NSF and IAPMO listed for potable water and sewer pipe. Medium-bodied, extremely fast setting PVC cement for pipe sizes through 150 mm (6”) interference fit, Sch. 80 through 100 mm (4”). Specially formulated for rigid and flexible applications where conditions are very wet and/or when quick pressurization is desired.

---

Notes:

Meets ASTM D2564. CSA certified for joining flexible PVC pipe to rigid PVC fittings used in hydromassage bathtubs. NSF and IAPMO listed for potable water and sewer pipe. Medium-bodied, extremely fast setting, for PVC pipe sizes through 150 mm (6”) interference fit, Sch. 80 through 100 mm (4”). Developed for rigid & flexible applications, wet conditions and/or when quick pressurization is desired.

---

Notes:

Meets ASTM D2235 for use with ABS pipe. NSF listed to CSA B181.1 for ABS DWV pipe and fittings. Medium-bodied, fast setting ABS cement for all classes and schedules through 150 mm (6”) interference fit.

---

Notes:

Meets ASTM D2564. NSF and IAPMO listed for potable water and sewer pipe.

---

Notes:

CSA certified for nonpressure ABS/PVC systems only. Meets ASTM D3138. Regular-bodied, fast setting, FOR TRANSITION JOINTS ONLY IN NON-PRESSURE SYSTEMS. Pipe sizes through 150 mm (6”) interference fit. Not for Sch. 80. Suitability of IPEX 96 should be verified for specific ABS/PVC materials.

Notes:

Meets the requirements of ASTM F656 for use with PVC pipe and fittings. NSF listed for potable water and sewer pipe. Very fast acting primer especially formulated for use with IPEX 25 Wet/Dry cement. Excellent primer for wet applications or when quick penetration of pipe and fitting surfaces is desired. Can also be used with any other PVC or CPVC cement.

Notes:

Meets ASTM F493. ANSI/NSF Standard 14 & 61 listed for potable water. Certified to CSA B137.6. Medium-bodied, for use on 12 mm to 50 mm (1/2” to 2”) diameters only. DO NOT USE PRIMER.

---

Notes:

Yellow: AQUARISE TWO-STEP CEMENT meets ASTM F493. ANSI/NSF Standard 14 & 61 listed for potable water. Certified to CSA B137.6. Heavy-bodied, for use on 63 mm, 75 mm & 100 mm (2-1/2”, 3” & 4”) diameters only. MUST BE USED IN CONJUNCTION WITH AQUARISE CPVC PRIMER.

Notes:

Grey, suitable for 40 mm to 150 mm (1-1/2 – 6”), without primer. Not recommended for use below 0°C (32°F). Meets the requirements of ASTM D2564. cNSF Listed to CSA B181.2 for DWV applications.

---

Notes:

Meets the requirements of ASTM D2564. cNSF Listed to CSA B181.2 for DWV applications. Heavy-bodied, medium setting, suitable for System 15 and System XFR pipe sizes 200 mm to 300 mm (8” to 12”) where gap filling is required. Use with System 15 / System XFR DWV primer. For System 15 pipe 14” to 24” (350mm to 600mm), refer to Xirtec 19 PVC cement.

Notes:

Meets the requirements of ASTM F656.

Notes:

Suitable for use with System 636 Flue Gas Venting, Type BH, Class IIA 65°C (149°F) pipe and fittings. Meets ASTM D2564 “Standard Specification for Solvent Cements for Polyvinyl Chloride (PVC) Plastic Piping Systems”. Medium-bodied, fast setting, PVC cement certified as a system component for use with all diameters of System 636 PVC pipe and fittings. Primer is always required for 6” and 8” (150 mm and 200 mm) piping systems and for all installations performed at temperatures of 0°C (32°F) or less.

---

Notes:

Suitable for use with System 636 Flue Gas Venting, Type BH, Class IIB 90°C (194°F) pipe and fittings. Meets ASTM F493 “Standard Specification for Chlorinated Polyvinyl Chloride (CPVC) Plastic Pipe and Fittings”. Heavy-bodied, medium setting, CPVC cement certified as a system component for use with all diameters of System 636 PVC or CPVC pipe and fittings. Primer is always required for 6” and 8” (150 mm and 200 mm) piping systems and for all installations performed at temperatures of 0°C (32°F) or less.

Notes:

Suitable for use with System 636 Flue Gas Venting pipe and fittings that meet ULC S636 standards. Meets ASTM F656 “Standard Specification for Primers for use in Solvent Cement Joints of Polyvinyl Chloride (PVC) Plastic Pipe and Fittings” System 636 PVC/CPVC Primer is certified as a system component for use with all diameters of System 636 PVC/CPVC pipe and fittings. Primer is always required for 6” and 8" (150 mm and 200 mm) piping systems and for all installations performed at temperatures of 0°C (32°F) or less. DO NOT USE PRIMER ON ABS SURFACES.

Notes:

Meets the requirements of ASTM F493 for use with CPVC pipe. NSF listed for potable water. Heavy-bodied, for use with BlazeMaster® CPVC pipe & fittings 20 mm - 80 mm (3/4” - 3”). Component for sprinkler pipe and fittings. For use with ULC 15S7 labelled IPEX BlazeMaster sprinkler pipe and fittings.

Notes:

Two-component, high-strength reactive adhesive for joining, fabricating and repairing PVC and CPVC pipe and fittings.

Notes:

PB-1: Plastic Handle Brush; fits standard pint and quart cans. CM BCP Can-Mate: Adjustable Plastic Handle Natural Bristle Brush; fits standard pint and quart cans.

---

Notes:

Adjustable plastic applicator with telescoping stem to fit all cans (except 1/4 pint). Available in 3/4” and 1-1/2” dauber sizes.

---

Notes:

DP daubers fit 1/2 pint & pint cans; DQ daubers fit quart cans. Available in 1/2”, 3/4”, and 1-1/2” dauber sizes.

---

Notes:

4020 swab for pipe diameters of 150 mm (6”) or larger; fits MT-648 can. 5020 Swab available for quart can.

---

Notes:

Swab holder and handle are reusable and can be used to cap the cement can. The swab is disposable and replaceable.

---

Notes:

3020 roller for pipe diameters from 75 mm through 150 mm (3” through 6”); fits MT-653 empty quart can. 7020 roller for pipe diameters of 150 mm (6”) or larger; fits MT- 648 can.

---

---